Used S9 11.5 TH/S (Shipping in 1 Business day)


Out of stock


Shipping straight out from our farm located in Davie, FL

Our farm

This miners are 100% functional are currently being used until the moment that they sell, when we will proceed to pack and ship them to our lucky Buyer the reason that we are selling these for is for making room for a new batch of miners that we have coming in soon.


AntMiner S9 Specifications:
1. Hash Rate: 11.5 TH/s ±7%
2. Power Consumption: 1323W ±10% (at the wall, with APW3, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.098 W/GH ±7%(at the wall, with APW3, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. ASIC Chip: BM1387
6. Dimensions: 350mm(L)*135mm(W)*158mm(H)
7. Cooling: 2x 12038 fans
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 600M

Please note the following:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 20-40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.
2. Each AntMiner S9 requires TEN 6-pin PCI-e connectors for 12V DC input (must be very stable power source) There are three hash boards that require three 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All TEN 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
3. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Power supply unit is not included. Cryptocorporation recommends the APW3 or the APW5 power supply for the AntMiner S9.


There are no reviews yet.

Be the first to review “Used S9 11.5 TH/S (Shipping in 1 Business day)”

Your email address will not be published. Required fields are marked *